金属热防护系统多层隔热材料的传热分析及参数优化

采用能量平衡方程和离散坐标法近似地建立了金属热防护系统多层隔热材料的一维稳态传热的数学模型，并利用遗传算法和纤维隔热材料的有效导热系数试验数据求解传热反问题，从而得到了模型中的纤维隔热材料的辐射衰减系数、反照率和隔热屏表面辐射发射系数。最后，由实验测得了多层隔热材料的有效导热系数，验证了采用优化参数后，多层隔热材料的传热模型的正确性。     

电励磁双凸极无刷直流发电机电压纹波分析

在电励磁双凸极无刷直流发电机结构参数一定,电阻性负载的条件下,考虑到铁芯材料的非线性饱和特性,在二维有限元非线性分析的基础上,通过仿真定量地分析解释了励磁磁场不同时,12/8电励磁双凸极发电机相电压波形在120~180°变化的原因及变化规律,并分析了励磁磁场强弱及电枢反应对发电机输出直流电压纹波的影响及其非线性变化规律,经过实验验证了分析结果的正确性。分析所得结论为电机性能的优化设计提供了理论依据,并对励磁控制的优化具有指导作用。同时,对双凸极电动机控制方式的选择具有指导意义。     

地下结构模型试验的光学激波管

光学激波管是进行抗爆结构试验研究的一种新型动载设备,它除具有常规激波管的通过电测手段测试试验结构物上一点或多点的应力、应变、速度等力学参数外,其突出的特点是通过光测手段能够拍摄试验结构物在冲击波动压作用下连续变化的过程和被破坏形态的清晰物理图像,进行地下结构的抗爆研究。本文较详细地介绍了用于地下结构抗爆试验研究用的光学激波管设备的构造和测试手段以及设备调试和应用试验的情况,最后还公布了用该设备拍摄到的激波进入通道后波后新物理现象的彩色波动照片及用该设备做的部分试验研究成果。     

面向网络化制造的数控车间组织模式

分析了网络化制造的基本特征和内涵,提出了面向企业的网络化制造系统运行模式;在对某大型航空制造企业的数控车间调研与应用实施的基础上,针对其组织模式存在问题,采用分行企业和独立制造岛的思想建立了适合数控车间网络化、敏捷化制造的分形组织模型;针对车间原有生产模式、产品特性,提出了基于成组技术的数控车间生产单元和生产线的划分方法,建立了面向产品流程的机构组成规则和车间内部的服务支援规则.该模型、方法、原则对传统的离散制造企业具有普遍的适用性,现已成功地被该数控车间采纳.     

基于知识图谱和自动机器学习的软件缺陷预测

不稳定和召回率低效的软件缺陷预测模型难以在行业领域应用，为解决稳定和高效各项性能评价指标的软件缺陷预测模型在工程实践应用的问题，提出了一种基于知识图谱和自动化机器学习的软件缺陷预测方法AutoKGGAS，首先获取软件缺陷预测模型数据，对知识建模、知识获取、知识融合、知识储存与知识计算等知识图谱构建技术研究，实现知识图谱推荐优质软件缺陷预测模型作为自动化搜索的热启动输入条件，根据不同的软件缺陷预测评价指标，优化不同最佳的模型结构.其次实证研究采用NASA开源数据集实验对象和六种性能评价指标，实验结果表明， AutoKGGAS自动化软件缺陷预测模型在不同数据集不同评价指标方面，性能优于知识图谱推荐的传统经典软件缺陷预测模型.自动化软件缺陷预测模型为航天软件缺陷预测辅助代码审查测试提供了原型，在工程实践应用方面具有重要的意义.     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

U型复合材料结构件热压罐固化变形及补偿技术应用研究

以复合材料U型构件为研究对象,采用数值模拟的方法对U型件进行热压罐温度场的模拟,模拟出在不同时间段工装和工件的温度分布情况,模拟工件在工装传热和变形影响下的内部传热、固化度、最终变形情况和残余应力水平等。根据模拟结果,优化热压罐固化工艺参数,从而改善固化热变形问题,根据分析结果制定补偿方案并实施验证,同时优化工装结构形式,采用工装型面补偿技术对零件固化变形进行预补偿。结果表明,补偿后零件变形后的外形与理论几何外形相差1.37mm,验证了补偿技术的可行性。工装型面补偿技术可以有效提高复合材料结构件的制造精度。     

Numerical analysis of hypersonic thermochemical non-equilibrium environment for an entry configuration in ionized flow

A theoretical methodology for thermochemical non-equilibrium flow combing with the HLLC (Harten-Lax-van Leer Contact) scheme was applied to study the hypersonic thermochemical non-equilibrium environment of an entry configuration in ionized flow. A two-temperature controlling model was utilized and the Gupta’s 11 species (N₂, O₂, NO, O, N, NO⁺, N₂⁺, O₂⁺, N⁺, O⁺, e^?) thermochemical non-equilibrium model was taken. Firstly, numerical calculations of hypersonic thermochemical non-equilibrium environments for different aerodynamic shapes were carried out to verify the reliability of the method above. Then, the method was used to research the effects of ionization and wall catalysis on the hypersonic thermochemical non-equilibrium environment of the entry configuration in ionized flow. The shock stand-off distance can be reduced by thermochemical reactions but doesn’t continue to decrease significantly when ionization occurs. The shock stand-off distance calculated by the 11 species model is 4.2% smaller than that calculated by the 5 species (N₂, O₂, NO, O, N) thermochemical non-equilibrium model without considering ionization. Ionization reduces wall heat flux but increases wall pressure a little. The effect of ionization on aerothermal loads is greater than that of aerodynamic loads. The thermochemical reactions of electrons and ions catalyzed at the wall increase wall heat flux significantly but make a small change in wall pressure. The maximum wall heat flux obtained by only considering the electrons and ions catalyzed at the partially catalytic wall condition is 11.8% less than that calculated at the super-catalytic wall condition.